Team Losi XXX Kiwald Edition Owner's Manual page 25

Figure 45
!
Step 6. Using needle-nose pliers, or small vise grips, grasp
the front shock shaft (118) between the grooves and thread a shock
end (120) onto the shaft (118). Thread the shock end (120) all the
way onto the shaft (118) until the threads stop.
!
Step 7. Repeat Step 6 for the second front shaft (118) and two
rear shock shafts (119).
!
Step 8. Carefully snap a 1/4" shock mount ball (122) into
each of the shock ends (120) on each of the shock shafts (118),
(119).
Figure 46
41
!
Step 9. Place a .050" plastic washer (36) over the end of each
shock shaft (118 & 119).
!
Step 10. Snap a 1/8" E-clip (41) into the groove closest to the
cartridge on all four shafts.
!
Step 11. Slide a #56 (Red) shock piston (123) over the end of
each shaft until it rests against the E-clip (41). Secure the pistons
(123) to the shaft with another 1/8" E-clip (41).
BAG E (Continued)
122
36
120
122
118
41
2 1
Figure 45
119
118
36
123
Figure 46
119