Troubleshooting Guide - Vitek VT-3468 BK Instruction Manual

ENGLISH
or SKIP- button. Then press PROG to store
the desired track in memory.
5. To plyaback the programmed tracks, press
the PLAY/PAUSE button.
6. To cancel the programmed playback, press
the STOP button twice or open the disc com-
partment lid, or set the FUNCTION switch to
another position.
Playback of МР3 files from a USB device
This unit can playback most of the discs record-
ed in the MP3 format, but there are cases when
the disc is not played back due to the settings of
the software, used while recording of the disc.
(for instance, due to absence of the disc finali-
zation.)
1. Switch on the unit. Connect the USB device
or the USB card.
2. Set the FUNCTION switch to CD/MP3/USB.
3. The unit will automatically start reading and
playback of МР3 files from the USB card, if
the МР3 disc is not inserted in the compart-
ment.
4. The unit will automatically start reading and
playback of the disc, if the unit does not find
the USB card and МР3 disc is inserted into
the compartment.
5. Press and hold the PLAY/PAUSE button to
switch to the USB playback mode.
6. The playback will start automatically starting
from the first track.
7. To pause the playback press the PLAY/
PAUSE button
8. To resume playback press the PLAY/PAUSE
button once again
9. To stop playback press the STOP button.
Programmed playback
Programming of playback of files from a USB-
device is performed in the same way as the pro-
gramming of playback of CD/МР3-discs.
Setting time
In the playback mode, press and hold the TIME
SET button.
Use the HOUR and MINUTES buttons to set
hours and minutes correspondingly (when set-
ting hours and minutes hold the TIME SET but-
ton).
To finish the setting, release the TIME SET but-
ton.
Downloaded From Disc-Player.com Vitek Manuals
3468IM.indd 6 3468IM.indd 6

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble. If
you consider that there is something wrong with
the unit, check possible causes in this table.
If you have not managed to solve the problem,
apply to the nearest authorized service center.
Specifications
Power supply 230 V ~ 50 Hz
Batteries UM 2("С") х 8
Power output 2 х 1,2 W
Speakers 2 х 8 Ohm
MW: 522 – 1620 kHz
Frequency band
FM: 64 – 108 MHz
Disc loading upper
The manufacturer reserves the right to make
changes to the characteristics of the device
without prior notice.
The service life of the device - five years.
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-Re-
quirements as laid down by the Council
Directive 89/336/EEC and to the Low
Voltage Regulation (23/73 EEC)
6
27.07.2010 15:43:21 27.07.2010 15:43:21