Vitek VT-3468 BK Instruction Manual page 5

set the BAND switch to the corresponding
position.
3. Rotate the TUNING control to select the de-
sired radio station.
4. When tuning to the station, transmitting a
stereo signal, the FM ST indicator will light
up.
5. After you finish listening to the radio set the
FUNCTION switch to the OFF position.
Antenna
For better reception in the FM band, extend the
antenna fully and orient it at the desired angle.
For better reception in the АM band, orient the
unit at the desired angle.
Playback of CD discs
Note:
Loading – Open the disc compartment. Insert a
CD disc and close the battery compartment lid
(22).
Ejection – After the playback is finished, open
the disc compartment lid and eject the disk.
Put it in a box.
Always close the disc compartment lid to pre-
vent dust getting into it. Always eject the disc
from the compartment, if it was not played back.
1. Switch on the unit.
2. Select the CD discs playback mode. Set the
FUNCTION switch to CD/ MP3/ USB.
3. Open the disc compartment. Insert a disc
and close the compartment lid. Make sure
that the disc is inserted properly – the label
upwards.
4. The number of the tracks will appear on the
LCD-display.
5. The playback will start automatically.
Playback
In the playback mode press the PLAY/PAUSE
button, the playback of the disc will start.
Pause
To pause the playback, press the PLAY/PAUSE
button in the playback mode.
To resume the playback press the PLAY/PAUSE
button once again.
Stop
1. To stop playback, pres the STOP button. The
Downloaded From Disc-Player.com Vitek Manuals
3468IM.indd 5 3468IM.indd 5
number of the tracks will appear on the LCD-
display.
Moving to the beginning of the track, to the
next and to the previous track
1. To move to the next/previous track, press the
SKIP+ or SKIP- once.
2. To quickly move to the necessary part of the
played back track, press and hold the SKIP+
or SKIP- buttons correspondingly.
Selecting album
You can select the necessary album, pressing
the ALBUM button.
Repeat playback of a disk or a track
1. To repeat one track, press MODE once,
"REP" will be flashing on the LCD-display.
2. To repeat one album, press the MODE but-
ton twice, "REP ALBUM" will be flashing on
the LCD-display.
3. To repeat all tracks on the disc, press the
MODE button thrice, "REP ALL" will be flash-
ing on the LCD-display.
Random playback
1. To playback all tracks on the disc in a random
order, press the MODE button four times in
the stop mode, "RAND" will appear on the
LCD-display. Press the PLAY/PAUSE button,
random playback of the tracks will start.
2. To cancel random playback, press the
MODE button once again, "RAND" will dis-
appear from the LCD-display.
PROGRAMMING THE PLAYBACK
You can program playback of tracks (maximum
20 tracks from a CD disc and 99 tracks from a
МР3 disc) in the desired order.
1. When the playback is stopped, press the
PROG button once. "PROG" and the number
of the track while programming "P01" will ap-
pear on the LCD-display
2. Select the desired track, consequently press-
ing the SKIP+ or SKIP- button.
You can select the necessary album, pressing
the ALBUM button.
3. To store the selected track, press the PROG
button once again.
The number of the track will change to
"Р02"».
4. Programming of the following track: select the
next track, consequently pressing the SKIP+
5
ENGLISH
27.07.2010 15:43:21 27.07.2010 15:43:21