Cleaning Of The Unit; Troubleshooting Guide - Vitek VT-3466 Manual Instruction

Cd/mp3 player
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH

CLEANING OF THE UNIT

• To avoid fire or electric shock, unplug the unit before cleaning.
• You can clean the surface of the unit using the cloth for dust removal. Be careful when cleaning
plastic parts.
• When the columns bodies become dirty, use a soft dry cloth for dust removal. Do not use wax or
abrasive polishes to clean columns bodies.
• When the front panel becomes dirty, use a soft cloth, slightly dampened in a weak soap solution.
Never use abrasive substances or polishes, they can damage surface of the unit.
Be careful! Provide that water or other liquids do not get inside the unit during cleaning.

TROUBLESHOOTING GUIDE

Improper usage is always the case of trouble. If you consider that there is something wrong with the
unit, check possible causes in this table.
If you have not managed to solve the problem, apply to the nearest authorized service center.
Radio
Noise while listening to radio sta-
tions in FM or AM band
The unit does not playback sta-
tions in FM or AM band
Disc
Disc is not played back
Some tracks cannot be played
back
Disc is in its place but tracks can-
not be played back
USB-device is not played backed
Downloaded From Disc-Player.com Vitek Manuals
3466IM.indd 8
3466IM.indd 8
Problem
The station is not tuned
FM band: the antenna is not
extended
АМ band: the unit is out of
reception area
The FUNCTION switch is not
set o the Radio mode
Low volume level
The FUNCTION switch is not
set to AUX(MP3)
Disc is absent or set improp-
erly
Disc is scratched or dirty
Disc is placed improperly
Disc is scratched or dirty
Improper disc format
USB-playback mode is not
selected
USB-device is not inserted
into the jack or there are no
МР3
files on it
Possible cause
8
Solution
Tune the station
Extend the antenna
Try other location variants
Set the FUNCTION switch to
the radio mode
Increase volume level
Set the
FUNCTION switch to
AUX(MP3)
Check the disc, it should be
placed with its label down
Wipe the disc with a soft cloth,
do not use the damaged discs
Check the disc, it should be
placed with its label down
Wipe the disc with a soft cloth,
do not use the damaged discs
Use discs with corresponding
format
Select the USB-playback
mode
Check whether the USB-de-
vice is inserted into the jack
and that it contains МР3 files
17.09.2010 11:04:22
17.09.2010 11:04:22

Advertisement

Table of Contents
loading

Table of Contents