Checking, Disassembling And Servicing; Checking And Adjusting - wsm B2420 Workshop Manual

B2420, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Checking Clutch Pedal Free Travel
CAUTION
• When checking, park the tractor on flat ground, apply the
parking brake, stop the engine and remove the key.
1. Slightly depress the clutch pedal (1) and measure free travel at
top of pedal stroke "L".
2. If adjustment is needed, loosen the lock nut (2) and turn the
clutch rod (3) to adjust the rod length within acceptable limits.
3. Retighten the lock nut (2).
4. After adjusting it, move the clutch pedal (1) by just the stroke "L"
(Free Travel).
While keeping the condition, measure distance "A" between the
stopper bolt (4) and the clutch housing (6).
5. If the measurement not within the factory specifications, adjust
it with the clutch pedal stopper bolt (4).
NOTE
After adjustment, fix the stopper bolt with the lock nut (2).
Clutch pedal free travel
"L"
Factory specification
Distance between
stopper bolt and clutch
housing "A"
Stopper bolt free travel
Reference
stroke "B"
(1) Clutch Pedal
(2) Lock Nut
(3) Clutch Rod
2-S4
CLUTCH
20 to 30 mm
0.79 to 1.10 in.
5.5 to 6.0 mm
0.22 to 0.24 in.
1.5 to 2.1 mm
0.059 to 0.08 in.
(4) Stopper Bolt
(5) Lock Nut for Stopper Bolt
(6) Clutch Housing
9Y1210436CLS0004US0
KiSC issued 06, 2012 A