wsm B2420 Workshop Manual page 292

B2420, WSM
Flasher Unit
The function of flasher unit is as follows.
1. The flasher unit blinks the turn signal lamp (3), (4)
and hazard indicator light (2) when the hazard switch
(13) is turned on.
2. Then flasher unit blinks the turn signal lamp (3) or
(4), when the turn signal switch (14) is turned
clockwise or counterclockwise.
3. The flasher unit lights the position lamp (5) when the
lamp switch (11) is turned on (Lo or Hi).
4. The blinking frequency is 60 to 120 times per
minutes.
(1) Flasher Unit
(2) Hazard Indicator Lamp
(3) Turn Signal Lamp (RH)
(4) Turn Signal Lamp (LH)
(5) Position Lamp
(6) Beacon Switch
(7) Beacon Lamp
(8) Fuse (20 A)
(9) Rear Combination Lamp
(10) Front Combination Lamp
9-M19
ELECTRICAL SYSTEM
(11) Head Lamp Switch
(12) Fuse (25 A)
(13.Hazard Switch
(14) Turn Signal Switch
(15) Fuse (15 A)
(16) Fuse (10 A)
a: To Battery
b: To Key Switch AC Terminal
9Y1210436ELM0031US0
KiSC issued 06, 2012 A