wsm B2420 Workshop Manual page 9

B2420, WSM
CARE OF PICTORIAL SAFETY LABELS
1. Keep pictorial safety labels clean and free from obstructing material.
2. Clean pictorial safety labels with soap and water, dry with a soft cloth.
3. Replace damaged or missing pictorial safety labels with new labels.
4. If a component with pictorial safety label(s) affixed is replace with new part, make sure new label(s) is (are)
attached in the same locations(s) as the replace component.
5. Mount new pictorial safety labels by applying on a clean dry surface and pressure any bubbles to outside edge.
I-5
INFORMATION
9Y1210436INI0009US0
9Y1210436INI0005US0
KiSC issued 06, 2012 A