8. Computer Installation
Remove the four Screws (A-1) from the back of the Computer (A)
Connect the Cable Wire (C3) to the 12 pin socket in the back of the Computer.
Connect the Hand Pulse Wire (C4) to the Computer.
Use the Allen Key to install the Computer onto the computer plate
on the handlebar and tighten with four Screws (A-1).
Screw w driver
9. Bottle Holder Installation
Attach the Bottle Holder (C-5) onto the handlebar and tighten with two Screws (C-6) by
Screwdriver.
Screw w driver
ASSEMBLY
21