As a Remote IPDS–capable Printer
A remote IPDS–capable printer can be configured only to a 5394 or 5494
remote control unit.
The auto configuration, CRTDEVPRT and CFGLCL commands can be used
to set the following parameters with the values listed below. Italicized values
are ones that you must set according to your system setup.
DEVD:
DEVCLS:
DEVTYPE:
MODEL:
LOCADR:
CTL:
FONT:
FORMFEED:
AFP:
NOTE: Set to *YES if using IBM's Advanced Function Printing
Setting Up the Printer
work station printer name
*RMT
*IPDS
0000
xx (Refer to your 5394 Configuration and
Installation Manual.)
name
zzz
*CONT
*NO
Utilities–AF1, or equivalent third–party application software.
2–27