Sanyo VCC-ZM300A Instruction Manual page 19

LENS SETTING (LENS)
Setting the autofocus (AUTO)
Sets a limit for near distance focusing and sets focusing sensitivity and focus iris.
Note: As a normal practice, use manual focus when keeping the camera focused on the same target object for a long period of time
(over 24 hours). This can be used with the one-push autofocus function when needed (operated from the system controller). Long
periods of surveillance with the autofocus in operation will shorten the work life of the lens.
1
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
1
Use the cursor button (j or l) to select SET for LENS,
then press the SET button.
The LENS screen will appear.
2
Use the cursor button (d or c) to select AUTO, then
press the SET button.
The FOCUS SETTING screen will appear.
3
LIMIT NEAR focus distance setting
Use the cursor button (j or l) to move the cursor to
LIMIT NEAR, then use the cursor button (d or c) to
change the distance value. (Ex: 3M)
Available settings: 1M (meter), 3M, 10C (centimeters), 30C,
50C
Note: Focusing becomes difficult when near distance limit is set
to less than "1M".
2
LENS
FOCUS AUTO ‚
ZOOM SET ‚
FOCUS SETTING
LIMIT NEAR 1M
SENSITIVITY HIGH
AREA SET ‚
3
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY HIGH
AREA SET ‚
PRESET OFF
MENU BACK
4
Setting focus SENSITIVITY
Use the cursor button (j or l) to move the cursor to
SENSITIVITY, then use the cursor button (d or c) to
change the setting. (Ex: LOW)
Available settings:
• HIGH: High sensitivity focusing
• LOW: Low sensitivity focusing
Note: When focus SENSITIVITY is set to HIGH, it may react to
even slight movements of the target object. In this case,
change the setting to LOW.
4
FOCUS SETTING
LIMIT NEAR 3M
SENSITIVITY LOW
AREA SET ‚
PRESET OFF
MENU BACK
18