Displaying/Closing The Menu Screen - Sanyo VCC-ZM300A Instruction Manual

DISPLAYING/CLOSING THE MENU SCREEN

SET
Cursor button SET button
1
Press the SET button for about 3 seconds.
The MAIN MENU screen will appear.
2
Using the cursor button
1 Use the cursor button (l) to move the cursor down.
When the cursor reaches the bottom of the screen, it goes
back up to the top of the screen.
2 Use the cursor button (j) to move the cursor up. When
the cursor reaches the top of the screen, it goes back
down to the bottom of the screen.
3 Use the cursor button (c) to move the cursor to the right.
This button is also used to change ON/OFF settings etc.
4 Use the cursor button (d) to move the cursor to the left.
This button is also used to change ON/OFF settings etc.
3
Switching to sub-menu screens
Use the cursor button (j l d c) until an item with a "y"
next to it is flashing, then press the SET button.
MAIN MENU screen
MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
4
Closing a settings screen
• To return to the previous screen, use the cursor button (l)
• To return to the normal screen, use the cursor button (d or
Use cursor button (l, then d or c) to change the PRESET
setting to ON, then press the SET button.
Simple camera address confirmation
When connecting the power cord to an outlet, the camera
address (See p47) is displayed on the monitor for 5 – 15 seconds.
Sub-menu screen
LANGUAGE
LANGUE
IDIOMA
MENU
to select BACK for MENU, then press the SET button.
c) to select END for MENU, then press the SET button.
Returning to the default setting
CAMERA ADDRESS
000
LANGUAGE
ENGLISH
FRENCH
SPANISH
BACK
8