View Setting Item Flow - Sanyo VCC-ZM300A Instruction Manual

VIEW SETTING ITEM FLOW

MAIN MENU
LANGUAGE SET ‚
CAMERA ID OFF
SYNC INT
PRIVACY MASK SET ‚
LENS SET ‚
MIRROR OFF
VIEW SETTING 1 ‚
OPTION SET ‚
PRESET OFF
MENU END
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF ‚
APERTURE ON ‚
AGC ON ‚
GAMMA ON
PRESET OFF
MENU BACK
Signifies that VIEW
SETTING 1 is the camera
setting 1. The cursor
button can be used (d or
c) to select one of the
nine VIEW SETTING
patterns (0 – 8).
A IRIS setting (See p24)
This setting allows selection of IRIS to either autoiris (AUTO) or manual iris (MANU). Initial setting is
autoiris.
B WHITE BALANCE adjustment (See p31)
This selects the white balance method to be used. Three white balance methods are available: auto
trace white balance (ATW), one-push automatic white balance (AWC), and manual white balance
(MWB). Default setting is auto trace white balance.
C Electronic SHUTTER setting (See p35)
A
This setting chooses either a fast shutter speed (SHORT) for target objects that may be moving quickly
B
or a slower shutter speed (LONG) for darker target objects.
C
D MOTION detector setting (See p37)
D
This function generates an alarm when a suspicious figure is detected. Each of the settings will enable
E
certain kinds of detection based on the natural image (swaying trees, flickers of light, etc.). It is also
F
possible to enable zooming in on target objects and intruders that have unusual brightness levels
G
(moving, bright) or are fast-moving.
E Profile compensation setting (APERTURE) (See p43)
This setting emphasizes the target object profile (horizontally or vertically).
F Automatic Gain Control (AGC) setting (See p44)
This sets the gain of the AGC circuit. When a target object is dark, the gain changes and the object
becomes lighter.
G GAMMA correction setting (See p45)
This setting enables contrast sensitivity to be boosted by controlling the gamma characteristics. Three
gamma controls are available: gamma correction (ON), smart gamma correction 1 (SMART 1), and
smart gamma correction 2 (SMART 2). Initial setting is ON.
22