Mounting The Lens - Sanyo Vcc-4110P Instruction Manual

MOUNTING THE LENS

1
C mount type lens
2
3
2
CS mount
type lens
B
Please use a DC type auto-iris lens (sold separately).
Check the lens mount
Do not use a lens if the length "
camera and prevent proper installation.
1
Remove the lens mount cap from the camera.
2
Install the auto-iris lens.
CS mount type lens
Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.
C mount type lens
To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully
align the lens mount with the camera opening and turn the lens slowly to install it.
3
Connect the lens plug to the lens iris output connector (LENS) on the side of the camera.
NOTE: When using an auto-iris lens, the supplied clamping core B must be installed on the lens wire, in
order to prevent electromagnetic interference to the other devices connected.
L 5
" is more than mm. That may damage the
L
6
English