Using The Snc Audio Upload Tool - Sony SNT-EX101 User Manual

Using the SNC audio upload tool

When you start the SNC audio upload tool, the Setting
tab is displayed.
Setting tab
Use this menu to set the unit to transmit audio from a
computer or upload an audio file.
User
Set the User ID and Password for the administrator.
The factory setting of the User ID for the Administrator
is "admin," and the Password is "admin."
Single sign-on: Select On to use the same user ID and
same password for all the video network stations.
Select Off to set the user ID and password
individually for each unit.
For details on setting with Off, see "User ID/
Password" on page 108.
User ID: This item can be set when Single sign-on is set
to On. The user ID specified here is applicable to all
video network stations.
Password: This item can be set when Single sign-on is
set to On. The administrator password specified here
is applicable to all video network stations.
Proxy
Check this box when you use a proxy server for
communications. When it is not checked, direct
communication with the unit is performed.
Auto detect: Select On to obtain the proxy setting
automatically from Internet Explorer.
Proxy address: Type the IP address or host name of the
proxy server.
108
Using the SNC audio upload tool — Transmitting Audio to unit
Proxy port: Type the port number used for
communication with the proxy server.
Note
The Proxy setting is applicable to all video network
stations. You cannot use individual proxy settings for
each unit.
Codec
Select the audio mode (Codec) from the drop-down list.
Save camera setting
Check this box to store the current settings and camera
list in the Setting tab. The same settings will be recalled
when the camera is rebooted.
Click this button repeatedly to hide/show the camera list.
Target camera(s) (Camera list)
When the SNC audio upload tool starts, it automatically
detects Sony video network stations connected to the
local network and displays them in the camera list. Up
to 256 video network stations can be displayed in the
list.
Select the check box on the left of the row to enable
audio transmission and audio file uploading for that unit.
You can then enable these functions simultaneously for
multiple video network stations.
Notes
• The SNC audio upload tool cannot detect video
network stations that are subsequently connected to
the local network after the program has started.
• The SNC audio upload tool cannot detect video
network stations that are not equipped with audio.
Camera select checkbox: The check box is located on
the left end of the row. Select this check box to
enable audio transmission and audio file uploading
for that video network station.
MAC address: Displays the MAC address of the video
network station.
IP address: Displays the IP address of the video
network station. "DHCP" is shown at the end of the
IP address when the IP address is obtained with a
DHCP server.
Model: Displays the model name of the video network
station.
Serial: Displays the serial number of the video network
station.
User: Displays the specified user ID and password. The
password is shown as turned letters.