Sony SNT-EX101 User Manual page 16

When Internet Explorer 6 is used
"Security Alert" dialog may appear according to the
status of the certificate. In this case, click Yes to
continue.
The viewer window is displayed (in SSL
communication).
When Internet Explorer 7 or Internet Explorer 8
is used
When you enter the unit IP address, "Certificate Error"
may appear according to the status of the certificate set
on the system. In this case, click Continue to this
website (not recommended). to continue.
The welcome page appears (in SSL communication).
When "Allow HTTP connection for some
clients" (page 46) is checked
To use HTTP and SSL connections separately to access,
enter the following in the address box of the browser.
For HTTP connection
For SSL connection
16
Accessing the System Using the Web Browser
When the viewer of the unit is displayed
for the first time
"Security Warning" is displayed. When you click Yes,
ActiveX control is installed and the viewer is displayed.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) settings of Internet Explorer, the
image may not be displayed. In that case, disable
Automatic configuration and set the Proxy server
manually. For the setting of the Proxy server, consult
your network administrator.
• When you install ActiveX Control, you should be
logged in to the computer as Administrator.
• If you are using Windows XP Service Pack 2 or later,
Windows Vista or Windows 7, the information bar or
"Security Warning" may appear. For details, see
"Installing ActiveX Control" in "When using
Windows XP Service Pack 2 or later" on page 8,
"Installing ActiveX Control" in "When using
Windows Vista" on page 11 or "Installing ActiveX
Control" in "When using Windows 7" on page 13.
Tip
The software is optimized for Internet Explorer using
medium font.
To display the viewer correctly
To operate the viewer correctly, set the security level of
Internet Explorer to Medium or lower, as follows:
1
Select Tools from the menu bar for Internet
Explorer, then select Internet Options and click
the Security tab.
2
Click the Internet icon (when using the camera via
the Internet), or Local intranet icon (when using
the camera via a local network).
3
Set the slider to Medium or lower. (If the slider is
not displayed, click Default Level.)