Alarm Recording Tab - Setting The Image Memory Function When Detecting The Alarm - Sony SNT-EX101 User Manual

POP server name
This is necessary when POP before SMTP is selected
for Authentication.
Type a POP (receiving mail) server name using up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server that sends e-
mails performs authentication using the POP user
account.
POP port number
Enter a port number from 110 to 65535.
Authentication mode
Set the user authentication mode.
If you do not use CRAM-MD5, select Login.
Note
CRAM-MD5 is not featured in the models to Chinese
markets.
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address for the recipient of a warning
mail (e-mail address of the Administrator), using up to
64 characters.
OK/Cancel
See "Buttons common to every menu" on page 31.
Alarm recording Tab — Setting the
Image memory function when
detecting the alarm
You can set to record an image and audio file to the
memory linked with an external sensor input or built-in
detection functions.
70
Recording Images in Memory — Image memory Menu
Alarm recording
Select On to automatically record the image and audio
files from alarm detection to the built-in memory or
USB memory.
Image file name
Type the file name you want to assign to the image(s) to
be recorded. You can use up to 10 alphanumeric
characters, - (hyphen) and _ (underscore) for naming.
Suffix
Select a suffix to be added to the file name.
Date & time: The Date & time suffix is added to the
image file name.
The Date & time suffix consists of the year (2 digits),
month (2 digits), date (2 digits), hour (2 digits),
minute (2 digits), second (2 digits) and sequential
number (2 digits), thus adding a 14-digit number to
the image file name.
Sequence number: A sequential number of 10 digits
between 0000000001 and 4294967295 and an
sequential 2 - digit number is added to the image file
name.
Tip
A sequential number added to Date & time and
Sequence number is used to identify individual files
created with consecutive alarm events.
Sequence number clear
Click Clear to reset the Sequence number suffix to 1.
Alarm
Select the alarm to be linked with the recording of image
and audio files.
Tip
Number of selectable input terminals is as follows:
SNT-EX101/SNT-EX101E: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None *
* Alarm sending is available only for the simple motion
detection function.
Sensor input 1: The external sensor that is connected to
sensor input 1 of the I/O port.
Sensor input 2: The external sensor that is connected to
sensor input 2 of the I/O port.
Sensor input 3: The external sensor that is connected to
sensor input 3 of the I/O port.
Sensor input 4: The external sensor that is connected to
sensor input 4 of the I/O port.
Tampering: An alarm that is triggered when the camera
detects tampering, such as direction shift or spraying.