Picture Tab - Sony SNT-EX101 User Manual

Mic volume
When microphone input is selected, set the volume level
of the audio input from the microphone input connector.
It is adjustable from -10 to +10.
Codec
Select the bit rate of audio from the microphone input
connector. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
If the bit rate is set to other than G.711(64kbps), no
audio is output when you use Plug-in free Viewer.
Echo canceler
Select On to reduce echo from audio transmission.
Audio noise reduction
Select On to activate the Audio noise reduction filter.
Dynamic range compressor
Select On to activate the Dynamic range compressor.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer's audio input terminal from a powered speaker
connected to the line output jack of the system.
Select On to output audio from the speaker.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See "Buttons common to every menu" on page 31.
38
Setting the Camera Image and Audio — Camera Menu

Picture Tab

You can set the color condition, brightness, etc., of the
camera.
Display sample:
Visibility Enhancer
Using the Visibility Enhancer function makes the darker
part of the camera image brighter as well as auto-adjust
brightness and contrast to show bright parts clearly
without white out.
To use this function, select High, Middle or Low. If you
do not use this function, select Off.
XDNR
Image noise can be reduced by using the XDNR
function. The intensity of the Noise Reduction filter can
be selected among High, Middle and Low. If you do not
use this function, select Off.
Brightness
Adjust the brightness. A larger value brightens the
image, and a smaller value darkens the image. A value
from –5 to +5 can be set.
Saturation
Select the saturation in 7 steps, from –3 to +3.
Selecting +3 provides the highest image saturation.
Sharpness
Select the sharpness in 7 steps, from –3 to +3.
Selecting +3 provides the sharpest picture.
Contrast
Select the contrast in 7 steps, from –3 to +3.
Selecting +3 provides the highest contrast.
OK/Cancel
See "Buttons common to every menu" on page 31.