Character length
Select a character length (7 or 8 bits) that corresponds to
the peripheral device connected to the serial interface.
Stop bits
Select a stop bit setting (1 or 2 bits) that corresponds to
the peripheral device connected to the serial interface.
OK/Cancel
See "Buttons common to every menu" on page 31.
Configuring the Viewer
— Viewer Menu
Click
Viewer
in the Administrator menu to display the
Viewer menu.
Using this menu, you can select the viewer to use and
configure advanced settings.
Layout tab
Homepage
Set the viewer or homepage to be displayed at the time
of access.
ActiveX Viewer: Displays the ActiveX viewer at time
of access.
Plug-in free Viewer: Displays the Plug-in free viewer
at time of access.
Custom: Select the homepage to be displayed.
You can display your favorite homepage stored in the
built-in flash memory or USB memory (not
supplied).
Configuring the Viewer — Viewer Menu
91