Sending An Image Via E-Mail - E-Mail (Smtp) Menu; Common Tab - Setting The E-Mail (Smtp) Function - Sony SNT-EX101 User Manual

Tour A to Tour E
Configure Tour A to Tour E respectively.
Each tour setting consists of 5 items: On/Off,
Sequence, Speed, Stay time. Effective period.
Select the tour to configure from the drop-down list.
On: The tour operates.
Off: The tour does not operate.
Sequence
Set the sequence of the tour.
The preset positions saved using the Position tab are
displayed in the drop-down list at the bottom.
Select the preset position from the group-tree, then click
Add. The selected preset position is added in the
Sequence list. Repeat this procedure to specify the
preset positions in sequence.
You can check the preset position by clicking Call.
If you specified an unnecessary preset position, click to
select it in the list and then click Delete.
To change the order in the list, select the preset position
and then click Up or Down.
Note
The tour cannot be set to On if no preset position is
added in the Sequence list.
Stay time
Type a period of time during which the camera is to stay
at each preset position, between 1 and 3600 seconds.
Effective period
Select the period during which the tour in activated.
Always: The tour can be activated any time.
Schedule: The tour is activated according to the
schedule you have set.
Click Schedule, and the menu for the effective
period is displayed. ("Setting the Schedule —
Schedule Menu" on page 80.)
Note
You cannot set tours if the effective periods overlap each
other.
OK/Cancel
See "Buttons common to every menu" on page 31.
Sending an Image via
E-mail
— e-Mail (SMTP) Menu
e-Mail (SMTP)
When you click
menu, the e-Mail (SMTP) menu appears.
Using the e-Mail (SMTP) function, you can send an
e-mail with an attached image file that has been shot
linked with an external sensor input or with the built-in
detection functions. An image file can also be sent
periodically.
The Mail (SMTP) menu is comprised of four tabs:
"Common" "Alarm sending" "Periodical sending" and
"Abnormal sending."
Note
The SNT-EP104 and SNT-EP154 do not have a function
to send image files from external automatic sensor
inputs or linked audio detection.
Common Tab — Setting the e-Mail
(SMTP) Function
e-Mail (SMTP)
Select On when you use the e-Mail (SMTP) function.
Notes
• You cannot send an audio file by using the e-mail
sending function.
• The frame rate and operability on the main viewer
may be reduced while a file is being transmitted by the
e-Mail (SMTP) function.
SMTP server name
Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
Sending an Image via E-mail — e-Mail (SMTP) Menu
in the Administrator
61