Download  Print this page

Using The System Utility; Snc Viewer - Sony SNT-EX101 User Manual

Hide thumbs


Table of Contents
Multicast: This protocol is selectable when
Multicast streaming (page 41) is On. When
Multicast is selected as the transmission port, RTP
(Real-time Transport Protocol) and UDP multicast
techniques are adopted for video/audio
transmission. By selecting it, the network
transmission load of the system can be reduced. If a
router that does not correspond to a multicast or
firewall is installed between the system and the
computer, video/audio may not play back properly.
In this case, select TCP or Unicast.

Using the System Utility

You can download system utility from the tools tab on
the main menu.
This operation is only available when you are logged in
as administrator.
To use the utility, click Download to begin download.
Network camera (SNC-RH124/RS46N/RS46P,
RS84N/RS84P) and video network station have a
common utility. For the video network station, some of
the utility functions cannot be used.

SNC Viewer

SNC Viewer is an application which allows you to set
the initial state of the viewer.
Installing the SNC viewer
Execute the downloaded SNCViewer.msi file.
Install the SNC viewer following the instructions
on the wizard.
When the license agreement policies are displayed,
agree after reading them carefully and install the
SNC viewer.
Using the SNC viewer
Click SNC viewer in the control panel.
Using the System Utility


Table of Contents

   Related Manuals for Sony SNT-EX101

Comments to this Manuals

Symbols: 0
Latest comments: