Voice Alert - Sony SNT-EX101 User Manual

FTP client
Checking this box allows you to select FTP client on the
Trigger panel in the main viewer.
By clicking FTP client a still image of the moment you
click is captured, and the image file is sent to the FTP
server.
When you click FTP client, the Trigger-FTP client
menu is displayed. You can set the necessary options
here. The setting options and setting procedures are the
same as those of the FTP client menu (page 65).
Image memory
Checking this box allows you to select Image memory
on the Trigger panel in the main viewer.
By clicking Image memory a still image of the moment
you click is captured, and the image file is recorded in
the built-in memory or USB memory (not supplied).
Click Image memory to display the Trigger-Image
memory menu. You can set the necessary options here.
The setting options and setting procedures are the same
as those of the Image memory menu (page 68).
Alarm output
Checking this box allows you to select Alarm output 1,
Alarm output 2, Alarm output 3 and Alarm output 4
on the Trigger panel in the main viewer. You can control
the alarm output by clicking Alarm output 1, Alarm
output 2, Alarm output 3 or Alarm output 4.
Note
This operation is not available on the SNT-EP104 or
SNT-EP154.
Select the alarm ouput control mode from Toggle or
Timer.
Toggle: Each time you run a trigger, On (short circuit)
or Off (open) is switched.
Timer: When you run a trigger, the alarm output is
switched to On, and will automatically set to Off
after the time specified in Duration has elapsed.
Duration
When Timer is selected, specify the time for which the
alarm output remains off, from 1 to 300 seconds.

Voice alert 1, 2, 3

Checking this box allows you to select Voice alert 1,
Voice alert 2 or Voice alert 3 on the Trigger panel in the
main viewer. You can output audio from the audio file
saved in the system by clicking Voice alert 1 , 2 or 3.
Audio file
Displays the name of the audio file saved in the system.
"Not uploaded" is displayed dimly if no audio file is
saved.
Notes
• This operation is not available on the SNT-EP104 or
SNT-EP154.
• Voice alert configuration is only available for CH1 on
the SNT-EX154.
OK/Cancel
See "Buttons common to every menu" on page 31.
Setting the Operations from the Viewer — Trigger Menu
79