Privacy Masking tab
Using the privacy masking enables you to hide images
by masking specified parts of the images when
Performing the pan/tilt/zoom operation on the camera
does not change the mask position.
This screen is for monitoring images and configuring
The control buttons are located at the top of the preview
You can operate the camera with these buttons.
Available by clicking the icon of the direction you wish
to move the camera.
Available by clicking - to zoom out and + to zoom in.
Available to call out the privacy masks, delete them one
by one or delete all at one time.
After completing the configuration, register by clicking
Call: Clicks the button to turn the camera facing to the
position where the privacy mask is set.
Clear: Click the button to delete the privacy mask set.
All clear: Click the button to delete all privacy mask.
Specify the color of privacy masks. This setting is
common to every privacy mask.
The colors used are as follows:
Black, Gray1, Gray2, Gray3, Gray4, Gray5, Gray6,
White, Red, Green, Blue, Cyan, Yellow, Magenta
Setting a privacy mask
Operate according to the following procedure to set a
privacy mask in the position of your choice:
Face the camera to the position where you want to
set a privacy mask using the control button on the
Specify the privacy mask area by dragging the
mouse on the preview screen.
Select the number to register from the Position
Select the color of the mask from the Color drop-
The color is common to every privacy mask. The
color selected last is applied.
The mask is displayed on the preview screen.
See "Buttons common to every menu" on page 31.
Setting the Camera Image and Audio — Camera Menu