Download  Print this page

Saving The Camera Position And Action; Preset Position Menu; Position Tab - Saving Pan/tilt/zoom Position - Sony SNT-EX101 User Manual

Hide thumbs

Advertisement

Table of Contents
Saving the Camera
Position and Action

Preset position Menu

When you click
Preset position
menu, the Preset position menu appears. This allows you
to save the camera's pan, tilt and zoom positions and set
position tours (programmed actions of the camera).
The Preset position menu consists of 2 tabs: Position
and Tour (position).
The Preview screen is displayed in the upper part.
Position Tab — Saving pan/tilt/
zoom position
You can set camera positions (pan, tilt and zoom
positions).
Note
These settings are not available on the SNT-EP104 or
SNT-EP154.
Position at alarm
The unit can synchronize a preset position with sensor
input with the detection functions.
If an alarm is detected by the sensor input or the
detection functions, the unit automatically moves to the
corresponding preset position.
If you do not want to synchronize with any preset
number, select none.
in the Administrator
Tip
The number of selectable sensor input terminals is as
follows:
SNT-EX101/SNT-EX101E: 2
SNT-EX104/SNT-EX154: 4
SNT-EP104/SNT-EP154: None
Sensor input 1 (S1)
Select a preset position to synchronize with the alarm
from Sensor input 1.
Sensor input 2 (S2)
Select a preset position to synchronize with the alarm
from Sensor input 2.
Sensor input 3 (S3)
Select a preset position to synchronize with the alarm
from Sensor input 3.
Sensor input 4 (S4)
Select a preset position to synchronize with the alarm
from Sensor input 4.
Camera tampering detection (TP)
Select the preset position to synchronize with the camera
tampering detect alarm.
VMF (VM)
Select the preset position to synchronize with the VMF
detection alarm.
Motion Detection (MD)
Select a preset position to synchronize with the alarm
from the motion detection.
Click Detection, and the motion detection menu is
displayed to allow you to set the motion detection
function (page 81).
Audio detection (AD)
Select the preset position linked with alarm by audio
detection function.
Click Detection, and the audio detection menu is
displayed to allow you to set the audio detection
function (page 81)
Note
In the case where the synchronized preset position is
specified, an alarm event that happens when the camera
moves to the preset position will be invalid.
Preset
You can save preset positions. You can also click Call to
move the camera to a specified preset position.
Saving the Camera Position and Action — Preset position Menu
59

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: