Select A Tool - Sony PCS-G70/G70P Function Manual

3. Select a tool

By clicking a tool button on the top part of the page, you can jump to the corresponding tool page. A brief
introduction of each tool is presented below.
• [Controller]
Controls the PCS-G70/G70P using the on-screen controller, or controls using the on-screen Remote
Commander in the same manner as you do with the PCS-RG70 Remote Commander.
• [Dial/Disconnect]
Calls a remote party, or ends a meeting.
• [Phone Book]
Displays the dial list.
Connects from the dial list.
Registers, confirms or edits the dial list.
For a private address book, the "Phone Book" button changes to the "Private
Address Book" button.
• [Setup]
Confirms or modifies the setup.
Sends messages.
Resets the setup functions (only when "sonypcs" has been entered as the user name).
• [Info]
Displays the connection status, line status, or other machine information.
Displays the "Cause Code."
Displays the "Call Log"(only when "sonypcs" has been entered as the user name).
• [Monitor]
Monitors a meeting being held with the PCS-G70/G70P over the Web.
Note
When Web Monitor is set to Off in the Administrator Setup menu, the "Monitor" page cannot be used.
4