Sending Images To Ftp Server - Ftp Client Menu; Common Tab - Setting The Ftp Client Function - Sony SNT-EX101 User Manual

Administrator e-mail address
Type the e-mail address of the camera administrator,
using up to 64 characters. This is used as the reply
address or the address for a system mail from the mail
server.
OK/Cancel
See "Buttons common to every menu" on page 31.
Sending Images to FTP
Server
— FTP client Menu
When you click FTP client
the FTP client menu appears.
Use this menu to set up for capturing and sending still
images to an FTP server. Using the FTP client function,
you can send an image and audio file that has been shot
and recorded linked with the external sensor input or
with the built-in detection functions to an FTP server.
An image file can also be sent periodically.
The FTP client menu consists of three tabs: Common,
Alarm sending and Periodical sending.
Note
The SNT-EP104 and SNT-EP154 do not have a function
of FTP client linked with audio detection.
Common Tab — Setting the FTP
client function
FTP client function
To activate the FTP client function, select On.
Note
The frame rate and operability on the main viewer may
be reduced while a file is being transmitted by the FTP
client function.
FTP server name
Type either the FTP server name to upload still images
using up to 64 characters, or the IP address of the FTP
server.
User name
Type the user name for the FTP server using up to
64 characters.
Password
Type the password for the FTP server using up to
64 characters.
Sending Images to FTP Server — FTP client Menu
in the Administrator menu,
65