Connecting The Base; Charging The Handset - Motorola IT.6T User Manual

Connecting the base

1. Plug the telephone line cord into the socket marked
2. Plug the power adaptor into the socket marked
plug the other end into the mains power wall socket. Switch on the mains power.
IMPORTANT
When the IT.6T is plugged into the power, all the base icons will illuminate while it powers
up. This will take a few seconds.
The answering machine is then ready to use.
If the answering machine is on the
If the answering machine is off all but the

Charging the handset

1. If you are charging the battery for the first time, place the handset on the base to
charge for at least 24 hours continuously.
2. When the handset is fully charged,
other end of the telephone line cord (make sure that one end is already plugged into
the base) into the telephone wall socket.
NOTE
You cannot access the battery in the handset. Do not attempt to remove the battery, as
you may damage the phone. If you need to replace the battery, contact customer service
helpline found in this user guide.
Getting started
on the underside of the base and
and icons will illuminate.
icon will go out.
icon will appear steady on the display. Plug the
on the underside of the base.
9