Digital Cordless Telephone IDEAL FOR OUTSIDE USE Motorola O2 Models: O201, O202, O203 and O204 Warning: Charge the handset for 24 hours before use.
Ultra long cordless 360 range, up to 1km. • Rugged design and sturdy composition makes your Motorola O2 phone ideal for outdoor use. • Dust and water resistant. Submersible in up to 1 meter of water for up to 30 minutes.
This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. Follow the simple instructions in ‘Getting Started’, on the next few pages. IMPORTANT Only use the telephone line cord supplied.
1. Getting started ..............7 2. Getting to know your phone ..........11 3. Using the phone ..............16 Switch the handset on / off ................16 To make a call ....................16 To make a call by pre-dialling.................16 To make a call using fast call keys ..............16 To make a hands-free call ................16 Call from the phonebook ................16 Call from the Calls Lists .................16...
To save a number from the Calls Lists to the phonebook ......26 To delete a Calls Lists entry ................26 To delete entire Calls Lists ................26 To redial the last number ................27 To view and dial a number in the redial list ............27 To copy a redial number to the phonebook .............27 To delete a redial list entry ................27 6.
10. Registration .................39 10.1 To register a handset ..................39 10.2 To select a base ....................40 10.3 To de-register a handset ................40 11. Help ..................41 12. General information ............42 13. Wall mounting ..............48...
1. Getting started IMPORTANT Although the O2 handset is water resistant we do not recommend you locate your main base or charger in the bathroom or other humid areas. Location You need to place your O2 base within 2 metres of the mains power and telephone wall sockets so that the cables will reach.
The line will hang up if the handset moves out of range of the base. Move closer to the base. The handset will automatically reconnect to the base. Setting up IMPORTANT The base station must be plugged into the mains power at all times. Do not connect the telephone line cord into the wall socket until the handset is fully charged.
1. Plug the power adaptor into the socket marked on the underside of the charger and plug the other end into the mains power wall socket. 2. The 750mAh Ni-MH battery pack is pre installed. If you are charging the batteries for the first time, place the handset on the charger to charge for at least 24 hours continuously.
BATTERY LOW icon is displayed and you hear a warning beep every 30 seconds during a call, you will need to recharge the handset before you can use it again. When charging, icon will scroll on the display. Once charged scrolling will stop. BATTERY PERFORMANCE In ideal conditions, fully charged batteries should give up to 12 hours talk time or up to 250 hours standby time on a single charge...
2. Getting to know your phone Overview of your handset A Earpiece B Display See page 13 for an overview of the display icons. C Scroll up / Volume up Scroll up through lists and settings. During a call, press to increase the earpiece and hands-free volume. When the phone is ringing, press to increase the handset ringer volume.
E Redial list / Pause In standby mode, press to open the redial list. Press and hold to enter a pause (P) during pre-dialling. F Talk / Hands-free Make or answer a call Activate and deactivate hands-free during a call. G * / Ringer off Dial a *.
Handset display 30/12 16:24 HANDSET 1 Menu Names DECT signal strength. Displays when ECO mode is on. Displays when ECO PLUS is on Handset ringer volume is Off. Displays when in hands-free mode. The alarm clock has been set. The keypad is locked. Displays when you have new voicemails.
Overview of the base / Charger Charger Base A Paging/Find handset This function allows you to page for the handset user or locate a missing handset. Paging calls cannot be answered by a handset. 1. Press on the base. All handsets registered to the base will ring and display Paging Call.
Menu map Settings Names Calls Lists Set Handset From menu in standby: Missed Calls Ringtone Received Calls Search Dialled Calls Ringer Volume Add Entry Receiver Vol. Delete Calls Copy Phonebk Handset Name Agenda Memory Status Language Del. Phonebook If there is an event, select Wallpaper Options.
3. Using the phone Switch the handset on / off 1. Press and hold to turn the handset on / off. To make a call 1. Press 2. Dial the telephone number. To make a call by pre-dialling 1. Enter the phone number (maximum 32 digits). If you make a mistake, press Clear. 2.
1. Press Menu, the display shows Calls Lists and press Select. 2. Scroll to highlight the calls list (Missed Calls, Received Calls, Dialled Calls, Delete Calls) you want. 3. Press Select.. 4. Scroll to the entry you want. 5. Press to dial the number.
NOTE After you hang up, the duration of your call is displayed for 5 seconds. 3.13 Intercom 3.13.1 Make an internal call If you have more than one handset registered to the base, you can make internal calls between two handsets. Internal Call Handset X displays to indicate an internal call.
3.14 To lock the keypad You can lock the keypad to prevent accidental dialling while carrying it around. 1. Press and hold . The icon is displayed. 2. To unlock the keypad, press Unlock. The display shows Press # to Unlock Keys.
4. Phonebook The handset phonebook can store up to 200 names and numbers. NOTE Numbers can be up to 24 digits long and names up to 16 characters long. Entries are stored in alphabetical order. To dial phonebook entries 1. In standby mode, press .
To enter a space, press Press to move between characters/digits. Press Clear to delete a character, or press and hold Clear to delete all characters. Character map Case Assigned characters and symbols L / U . , - ? ! ¡ ¿ ’ @ : ; / 1 a b c 2 ä...
Search is highlighted. Press Select. The first entry is highlighted on the display. 3. Enter the first letter of the name to search alphabetically then scroll to the exact entry. 4. Press to dial the entry or to return to standby mode. To view details of an entry 1.
5. Scroll to the number of the handset you want the entry to be copied to. Press Select. 6. Copy is completed when the message “<Name> copied” appears on the display. 7. Press to return to standby mode. NOTE If an entry with the same number is already stored in the receiving handset, it will not be copied.
4.13 To clear a fast call number 1. Press Names to enter the phonebook menu. Search is highlighted. Press Select. The first entry is highlighted on the display. 3. Enter the first letter of the name to search alphabetically then scroll to the exact entry, then press Options.
5. Calls Lists If you have subscribed to Call Display service, and provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and time of the call (if provided by the network). NOTES If the caller’s number is stored in your phonebook along with a name, the name will also be displayed.
5. Display shows Show Details. Press Select. The number (or name if stored in the phonebook), date and time of the call are displayed. 6. Press Back to return to the previous menu level or to return to standby mode. To save a number from the Calls Lists to the phonebook 1.
3. Scroll to highlight the calls list (Missed Calls, Received Calls, Dialled Calls Calls) you want. 4. Display shows Delete All Calls ?. Press to confirm. 5. Press to return to standby mode. To redial the last number The phone lets you redial any of the last 20 numbers called. Numbers can be up to 32 digits long.
6. Agenda To add a new event Use the phone to remind you of details of up to five events such as birthdays, anniversaries or appointments. Up to 24 characters can be entered as the subject. 1. Press Menu, scroll Agenda and press Select.
1. Press Menu, scroll Agenda and press Select. 2. Stored events are displayed. The first event is highlighted on the display. If required, scroll to the event you want and press Options. 3. Scroll Show Details and press Select. The description, date and time of the agenda are displayed.
5. Press to return to standby mode. 7. Clock & Alarm If you have subscribed to a FSK type Caller ID Service, the date and time is set automatically when you receive your first call. If you do not have a FSK Caller ID service, you can set the date and time manually. NOTES In either case the year has to be manually set.
3. Scroll 12 Hour 24 Hour and press Select. 4. Press to return to standby mode. 8. Handset settings To set the handset ringtone You can set different ringtones for external calls and internal calls. Select from 20 handset ringtones. You will hear a sample ring as you scroll to each ringtone.
To change the handset name If you are using more than one handset with the base, you can give each handset a personalised name to easily distinguish between the handsets. A name can be up to 10 characters long. 1. Press Menu, scroll Settings and press Select.
To set the screensaver When the screensaver is set to Clock, an analogue clock is displayed. The screensaver comes on when the screen backlight switches off in standby mode. To change the backlight timeout setting, see “To set light timeout” in the next section. 1.
8.11 To set PBX Access Code If the phone is connected to a switchboard, you may need to enter an PBX Access Code in the dialling sequence to be able to connect to the outside line. The PBX Access Code will be displayed at the beginning of a number on the screen. The code can be up to 4 digits long.
9. Base settings To set the base ringtone Select from 5 base ringtones. You will hear a sample ring as you scroll to each ringtone. 1. Press Menu, scroll Settings and press Select. 2. Scroll Set Base and press Select. Ringtone is highlighted.
4. Scroll All Handsets Select Handset then press Select. If you choose Select Handset, all available handsets are displayed. • Scroll to the handset you want then press Select. • Scroll to the number of rings that you want to set: 2, 4 or 6 and press Select.
To reset the phone You can restore the phone to its default (original) settings. Resetting the phone will not affect the phonebook or Calls Lists, and all handsets registered to the base will be retained. Only the handset and base settings will be reset. 1.
9.10 Default settings Handset Name HANDSET Key tone Auto pick up Ringer melody (EXT) Melody 3 Ringer melody (INT) Melody 1 Ringer volume Earpiece volume Phonebook Unchanged Call list Unchanged Redial list Unchanged Master PIN 0000 Keypad lock Time format 24 hours Alarm Recall Mode...
10. Registration Up to 11 handsets can be registered to one base station. Additional handsets must be registered to the base before you can use them. • The instructions described below apply specifically to the handset of this model If you wish to register another manufacturer’s handset, the instructions may vary.
10.2 To select a base You can register the handset with up to 4 bases. Once registered, you can switch between bases, for example, bases at home and at work. 1. Press Menu, scroll Registration and press Select. 2. Scroll Select Base and press Select.
11. Help icon is not scrolling during charge • Bad battery contact – Adjust the handset slightly on the cradle. • Battery is full – no need to charge. No dialling tone • No power – check the connections. Reset the phone: unplug and plug back in the mains.
12. General information IMPORTANT This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to emergency services. This product is intended for connection to analogue public switched telephone networks and private switchboards in Singapore.
Installation Guidelines • Read and understand all instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Do not install this product near a bath tub, sink, or shower. • Operate this phone using only the power source that is indicated on the marking label. If you are unsure of the power supply to your home, consult with your dealer or local power company.
(“SUNCORP”) What Does this Warranty Cover? Subject to the exclusions contained below, SUNCORP warrants that this Motorola branded product (“Product”) or certified accessory (“Accessory”) sold for use with this product that it manufactured to be free from defects in materials and workmanship under normal...
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR SUNCORP BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE...
Motorola or SUNCORP, are excluded from coverage. Use of Non-Motorola branded Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products or Accessories or other peripheral equipment are excluded from coverage. Unauthorized Service or Modification. Defects or damages resulting from service,...
R&TTE This product is intended for use within Europe for connection to the public telephone network and compatible switchboards. This equipment complies with the essential requirements for the Radio Equipment and Telecommunications Terminal Equipment Directive 1999/5/EC including compliance with ICNIRP standard for electromagnetic energy exposure. Connecting to a switchboard This product is intended for use within Singapore for connection to the public telephone network.
13. Wall mounting IMPORTANT Before you wall-mount your O2, check that you are not drilling into any hidden wiring or pipes. Before you drill, make sure the power and telephone line cables will reach the sockets. 1. Use the following templates to mark the drilling locations. 4.9cm •...
2. Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from the wall on which to hang the phone. 3. Slot the holes on the back of the base over the screw heads and gently pull the base/ charger down to make sure it is securely in place.
<This page has been intentionally left blank>...
Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Motorola Type: O201, O202, O203 and O204 Descriptions: DECT phone without telephone answering machine (O20x) and their multi-handset versions. to which this declaration related is in conformity with the essential requirements of the following directives of the Council of the European Communities: R&TTE Directive (1999/5/EC)
Manufactured, distributed or sold by Suncorp Technologies Ltd., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners.