Integrating Your System With Peripheral Devices - SMART Board M685ix2 Configuration And User's Manual

C H A P T E R 2
Installing your interactive whiteboard system
No. Connector
7 Power
8 USB B
9 RJ45 (8P8C modular connector)
10 RJ45 (8P8C modular connector)
11 7-pin mini-DIN
12 4-pin mini-DIN 5V/2A output
I M P O R T A N T
The 4-pin mini-DIN 5V/2A output provides power to SMART products only.
N O T E S
To connect your SMART Board M685 interactive whiteboard see the SMART Board
l
M685ix2 interactive whiteboard system installation and cabling guide
(smarttech.com/kb/170440).
To connect accessories to your interactive whiteboard, refer to the documents included
l
with the accessories and consult the SMART Support website (smarttech.com/support)
for additional information.

Integrating your system with peripheral devices

For information on integrating your SMART Board M685ix2 interactive whiteboard appliance-
based systems with peripheral devices, see Connecting peripheral sources and outputs on page
78.
11
Connect to:
Mains power supply
Do not use (for service access only)
Network (for webpage management and SNMP
access). Network connection only.
Projector 2 (for dual interactive whiteboard
systems). Crossover cable connection only.
Cable harness to interactive whiteboard
Cable harness to interactive whiteboard