SMART Board M685ix2 Configuration And User's Manual page 28

C H A P T E R 3
Using your interactive whiteboard system
Setting Use
MAC Address Displays the projector's
MAC address in xx-xx-xx-
xx-xx-xx format.
Group Name Displays the projector's
workgroup name as set by
an administrator (maximum
12 characters).
Projector Name Displays the projector's
name as set by an
administrator (maximum 12
characters).
Location Displays the projector's
location as set by an
administrator (maximum 16
characters).
Contact Displays the contact name
or number for projector
support as set by an
administrator (maximum 16
characters).
Language menu
Language Selects language
preference.
Information menu
Lamp Hours Displays the current number
of lamp usage hours from 0
to 4000 hours from when it
was last reset.
Input Displays the currently
displayed video input source
(VGA, HDMI1, HDMI2 or
None).
20
Notes
You can set the projector's workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 43 and Remotely
managing your system through an RS-232
serial interface on page 53).
You can set the projector's name using the
remote management features (see Remotely
managing your system through a network
interface on page 43 and Remotely managing
your system through an RS-232 serial
interface on page 53).
You can set the projector's location using the
remote management features (see Remotely
managing your system through a network
interface on page 43 and Remotely managing
your system through an RS-232 serial
interface on page 53).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface on page 43 and Remotely
managing your system through an RS-232
serial interface on page 53).
Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 27 for
details on the lamp hours reset procedure.