SMART Board M685ix2 Configuration And User's Manual page 53

A P P E N D I X A
Remotely managing your system through a network interface
Submenu setting
Power
Restore All Projector
Defaults
Volume
Mute
Volume Control
Closed Captioning
Display Mode
Brightness
Contrast
Frequency
Tracking
Sharpness
White Peaking
Degamma
Colour
45
Description
Turns the projector on or puts it into Standby mode. Select the
Power ON or Power OFF button.
Returns projector settings to default values or refreshes the
current settings. Select Submit or Refresh.
I M P O R T A N T
The Submit option is irreversible and resets all values.
Adjusts the projector's volume from -20 to 20.
Turns the mute settings on or off. Select On to mute the
projector's sound and Off to turn off mute.
Enables volume control. Select On to enable volume adjustment
and select Off to disable volume adjustment if you prefer to use
your audio system or speaker (not included) controls.
Turns the closed captioning feature on or off.
Adjusts the display output to SMART Presentation, Bright
Room, Dark Room, sRGB and User modes so that you can
project images from various sources with consistent colour
performance:
SMART Presentation is recommended for colour fidelity.
l
Bright Room and Dark Room are recommended for
l
locations with those conditions.
sRGB provides standardised accurate colour.
l
User enables you to apply your own settings.
l
Adjusts projector brightness from 0 to 100.
Adjusts the difference between the lightest and darkest parts
of the image from 0 to 100.
Adjusts the display data frequency of the projected image from
-5 to 5 to match the frequency of your computer's graphics card.
Synchronises your projector's display timing with your computer's
graphics card from 0 to 31.
Adjusts the projected image's sharpness from 0 to 31.
Adjusts the image colour brightness from 0 to 10 whilst providing
more vibrant white shades. A value closer to 0 creates a natural
image and a value closer to 10 enhances brightness.
Adjusts the colour performance of the display from 0 to 3.
Adjusts the Red, Green, Blue, Cyan, Magenta and Yellow colours
on the projector from 0 to 100 to provide custom colour and
luminance output. Each colour has a default value of 100.
Adjustments to the colour settings register to the User mode.