NEC DS1000 Quick Setup Manual page 43

2. Enter the number of the extension you want to add to a Pickup Group (e.g., 300) +
1802:EXT:302
ALLOW DND?nnn
3. Press
1802:EXT:302
PK-UP GROUP NUM?n
4. Enter the number of the Pickup Group to which the extension should belong (1-8, 0=no group) +
5. Press
Press
Part II: Assign Group Call Pickup Keys to Extensions:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1701:KEY PROGRAMMING
EXTENSION #?nnn
3. Enter the number of the keyset extension (e.g., 300) you want to program (see Part I) +
1701:EXT:nnn
KEY NUMBER?n
4. Enter the number of the Programmable Function Key you want to assign as a Group Call Pickup Key
(1-24, depending on keyset type) +
1701:EXT:nnn KEY:nn
nnnnnnnn
5. For the key selected, assign it as a Group Call Pickup Key (
11 =delay ring), then enter the Pickup Group number (1-8) +
6. Press
Press
Press
Feature Quick Steps
To answer a call ringing a phone in your Pickup Group:
1. Lift handset + Press flashing Group Call Pickup Key or dial *#.
DS1000/2000 Quick Setup Guide
VOL Up until you see:
to go back to step 2 and select another extension to program.
CONF
OR
CONF twice to exit program 1802.
1701 + HOLD . You see:
to go back to step 4 and select another key to program.
CONF
OR
CONF twice to go back to step 3 and select another extension to program.
OR
three times to exit program 1701.
CONF
Section 2: Customizing Features
HOLD . You see:
09 =immediate ring,
HOLD
Section 2: Customizing Features ◆ 2-19
HOLD . You see:
CONF
HOLD . You see:
10 =lamp only,
.
.
2