NEC DS1000 Quick Setup Manual page 24

Section 1: Start-up Programming
To program a feature, press # and the feature's code. For example, to enable incoming Paging, press # and dial V P Y , then SPK
to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to the attendant.
Feature
Ringing Line Preference
Speed Dial, Personal
Speed Dial, System
System Program Access
Time and Date
Intercom Voice Announce
(for incoming Intercom
calls)
1-20 ◆ Section 1: Start-up Programming
User Programmable Features
Mnemonic Numeric
#RLP #757
#SP #77
#SP #77
#*#*
#TD #83
#VA #82
Operation
#RLP + Y to enable or N to disable + SPK to
exit.
+ Press bin key (for bins 701-710) or DIAL
#SP
then bin key (for bins 711-720) + HOLD + Dial
outside line (e.g., 1), Line group (e.g., 90-98), or
ICM for Intercom feature + HOLD + Number to
store + HOLD twice + Name + HOLD + Press
another bin key or SPK to exit.
+ Dial System Speed Dial bin number
#SP
(e.g., 200) + HOLD + Dial outside line (e.g., 1),
Line group (e.g., 90-98), or ICM for Intercom
feature + HOLD + Number to store + HOLD
twice + Name + HOLD + Dial another System
Speed Dial bin or SPK to exit.
#*#* + Enter programming password
#TD + Enter time in 24-hour clock using hours
(2 digits), minutes (2 digits) and seconds (2 dig-
its) + HOLD + Enter date using month (2 digits),
day (2 digits) and year (4 digits) + HOLD +
SPK to exit.
+ V for voice announce or R for ring + SPK
#VA
to exit.
Access Level
DS1000/2000 Quick Setup Guide
2-5
1-5
4 and 5
3-5
4 and 5
3-5