NEC DS1000 Quick Setup Manual page 36

Section 2: Customizing Features
2. Enter 1801 + HOLD . You see:
1801:EXTENSION PROG
EXTENSION?nnn
3. Enter the 34-button keyset extension you want to program (e.g., 300) + HOLD . You see:
1801:EXT:nnn
PT TYPE?nn nnnnnnnnn
4. Press VOL Up until you see:
1801:EXT:nnn
DSS TYPE?nnnn
5. Enter the type of DSS Console attached to the extension you selected in step 3 above (1=24-button,
2=110-button) + VOL Up . You see:
1801:EXT:nnn
DSS BLOCK NUM?n
6. Enter the number of the DSS Block (1-4) you want to assign to the DSS Console attached to the exten-
sion you are programming + HOLD .
7. Press CONF to go back to step 3 and select another extension to program.
Press CONF twice to exit program 1801.
Part II: Program the DSS Console Keys.
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 1704 + HOLD . You see:
1704:DSS KEY PROG
DSS BLOCK NUM?
3. Enter the number of the DSS Console block you want to program (see Part I) + HOLD . You see:
1704:DSS KEY PROG
DSS KEY:n
4. Enter the number of the DSS Console key you want to program (1-110) + HOLD . You see:
DSS BLOCK:n KEY:n
nnnnnnnnnnnn
5. For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) + VOL Up .
2-12 ◆ Section 2: Customizing Features
Normally, the first console you install has block 1, the second has block 2, etc.
OR
The previously programmed assignment for the selected key displays.
You can optionally press ICM + VOL Up to scroll through the available DSS Console key
options. For more on the features listed, refer to the Software Manual on the System Document CD.
Feature
Undefined (blank) Key
Line Key
Park Orbit Key
Hotline Key
Call Coverage Immediate Ring
Call Coverage No Ring (lamp only)
Call Coverage Delay Ring
Group Pickup Immediate Ring
Key Code
00
03 + Line number (e.g., 1)
+ Park Orbit (60-69)
04
05 + Hotline Partner's Extension (e.g., 304)
+ Covered Extension (e.g., 304)
06
07 + Covered Extension (e.g., 304)
+ Covered Extension (e.g., 304)
08
09 + Pickup Group (1-16)
DS1000/2000 Quick Setup Guide