NEC DS1000 Quick Setup Manual page 31

To disable Caller ID for the Class of Service, dial
0101:COS:n
2nd Call CLID?nnn
6. To enable Second Call Caller ID for the Class of Service, dial
To disable Second Call Caller ID for the Class of Service, dial
0101:COS:n
3rd PARTY CLID?nnn
7. To enable Third Party Caller ID Check for the Class of Service, dial
To disable Third Party Caller ID Check for the Class of Service, dial
0101:COS:n
'-' IN CID DISP?nnn
8. To enable the Caller ID Display Separator for the Class of Service, dial
To disable the Caller ID Display Separator for the Class of Service, dial
0101:COS:n
FORCE AC CODES?nnn
9. Press
0101:COS:n
CLID ALERT LAMP?nnn
10. To enable the Caller ID Alert Lamp for the Class of Service, dial
To disable the Caller ID Alert Lamp for the Class of Service, dial
11. Press
Press
Part III: Assign the Class of Service with the Caller ID Options set to the Extension.
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter
1801:EXTENSION PROG
EXTENSION#?
3. Enter the number of the keyset extension you want to program (e.g., 300) +
1801:EXT:nnn
PT TYP?n:nnnnnn nnn
4. Press
1801:EXT:nnn
CLASS OF SERVICE?n
5. Enter the Class of Service (1-15) you want to assign to the extension selected +
1801:EXT:nnn
CLASS OF SERVICE?n
6. Press
Press
DS1000/2000 Quick Setup Guide
OR
OR
OR
VOL Up until you see:
OR
to go back to step 3 and select another Class of Service.
CONF
OR
CONF twice to exit program 0101.
1801 + HOLD . You see:
VOL Up until you see:
CONF and go back to step 3 to select another extension.
OR
CONF twice to exit program 1801.
Section 2: Customizing Features
6 (for no) + VOL Up
9 (for yes) +
(for no) +
6
9
Section 2: Customizing Features ◆ 2-7
. You see:
VOL Up .
. You see:
VOL Up
(for yes) + .
9 VOL Up
6 (for no) + VOL Up . You see:
(for yes) + .
9 VOL Up
6 (for no) + VOL Up . You see:
(for yes) + .
HOLD
6 (for no) + HOLD .
HOLD . You see:
. You see:
HOLD
2