Changing The System Password - NEC DS1000 Quick Setup Manual

Section 1: Start-up Programming
4. Press VOL Up until you see:
1807:EXT:nnn
HUNT TYPE?nnnn
5. Dial 3 (Busy/Ring No Answer Hunting for All Calls) and press VOL Up . You see:
1807:EXT:nnn
HUNT DEST?nnn
6. Enter the Voice Mail master number + HOLD .
7. Press CONF and go back to step 3 to program another extension.
Press CONF twice to exit program 1807.

Changing the System Password

The default system passwords are:
To change the system password:
1. Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2. Enter 9905 + HOLD . You see:
9905:PASSWORD PROG
PASSWORD LVL?
3. Enter the level (1-3) for the password you want to change + HOLD . You see:
9905:PASSWORD PROG
NEW PASS?
4. Enter the new password for the level selected (up to 8 digits) + HOLD . You see:
9905:PASSWORD PROG
CONFIRM?
5. Reenter the password you entered in step 4 above + HOLD . You see:
9905:PASSWORD PROG
PASSWORD ACCEPTED
6. Press CONF to return to step 3 and select another password to change.
Press CONF twice to exit program 9905.
1-16 ◆ Section 1: Start-up Programming
If you don't want to use Voice Mail, the overflow destination can be another extension or the
system attendant (e.g., 300).
OR
Password Level
System Administrator 1
System Administrator 2
Installer
OR
Password Level
0000 1
9999 2
372000 3
DS1000/2000 Quick Setup Guide