Remote Controller (Wired Type) - Daikin OH08-1 Instruction Manual

OH08-1
1.1.4 Installation
1.Remove the upper part of remote controller.
Insert minus screwdriver into the slots in the lower part of
remote controller (2 places), and remove the upper part of
remote controller.
The PC board is mounted in the
upper part of remote controller. Be
careful not to damage the board
with the minus screwdriver.
2.Fasten the remote controller.
For exposed mounting, fasten with
the included wood screws (2).
For flush-mounting, fasten with
the included machine screws (2).
For the field supplied switch box, use optional accessories
KJB111A or KJB211A.
NOTE
Choose the flattest place possible for the mounting sur-
face. Be careful not to distort the shape of the lower part of
remote controller by over-tightening the mounting screws.
Control Systems
Minus screwdriver
Insert the minus
screwdriver and
twist lightly to remove.
Switch Box
(Field supplied parts)
Machine
Screws
(M4 x 16)

Remote Controller (Wired Type)

Upper Part of
Remote Controller
Lower Part of
Remote Controller
Wood Screws
(φ3.5 x 16)
2
7