Daikin OH08-1 Instruction Manual page 63

OH08-1
When the air conditioner stops in emergency, the run lamp on the indoor unit starts blinking. Take the
following steps yourself to read the malfunction code that appears on the display. Contact your dealer with
this code. It will help pinpoint the cause of the trouble, speeding up the repair.
TEST
1
Press the INSPECTION/TEST button to select the inspection mode "
0
" " appears on display and blinks. "UNIT" lights up.
2
UP
DOWN
Press PROGRAMMING TIMER BUTTON and change the unit number.
Press to change the unit number until the indoor unit beeps and perform the following operation according
to the number of beeps.
Number of beeps
3 short beeps .........................Perform all steps from 3 to 6 .
1 short beep ...........................Perform 3 and 6 steps
1 long beep ............................Normal state
3 MODE
Press OPERATION MODE SELECTOR BUTTON.
0
" " on the left-hand of the malfunction code blinks.
4
UP
DOWN
Press PROGRAMMING TIMER BUTTON and change the malfunction code.
Press until the indoor unit beeps twice.
MODE
5
Press OPERATION MODE SELECTOR BUTTON.
0
" " on the right-hand of the malfunction code blinks.
6
UP
DOWN
Press PROGRAMMING TIMER BUTTON and change the malfunction code.
Press until the indoor unit makes a long beep.
The malfunction code is fixed when the indoor unit makes a long beep.
Control Systems
Remote Controller (Wireless Type)
0
".
2
61