Daikin OH08-1 Instruction Manual page 64

Remote Controller (Wireless Type)
MODE
7
Reset of the display
Press OPERATION MODE SELECTOR BUTTON to get the display back to the normal state.
II. IN CASE BESIDES EMERGENCY STOP
1. The unit does not operate at all.
Operate the indoor unit with the remote controller of the same number.
Signal transmitted from a remote controller of a different number cannot be accepted. (If the number is not
mentioned, it is considered as "1")
2. The system operates but it does not sufficiently cool or heat.
Contact the place of purchase in the following case.
WARNING When you detect a burning odor, shut OFF power immediately and contact the place of purchase. Using
the equipment in anything but proper working condition can result in equipment damage, electric shock
and/or fire.
62
Check if the receiver is exposed of sunlight or strong light. Keep receiver away from light.
Check if there are batteries in the remote controller. Place the batteries.
Check if the indoor unit number and wireless remote controller number are equal.
Number
If the set temperature is not proper.
If the FAN SPEED is set to LOW SPEED.
If the air flow angle is not proper.
ON OFF
2 4
6 TEMP
TIME
UP 2 4
CODE
DOWN 6
FAN
RESERVE CANCEL
UNIT N .
O
TIMER
MODE
3 5
SWING
7
/TEST
1
Number
OH08-1
Control Systems