Daikin OH08-1 Instruction Manual page 57

OH08-1
Heating capacity & Outdoor air temperature
Heating capacity drops as outdoor air temperature lowers. If feeling cold, use another heater at the
same time as this air conditioner.
Hot air is circulated to warm the room. It will take some time from when the air conditioner is first started
until the entire room becomes warm. The internal fan automatically turns at low speed until the air
conditioner reaches a certain temperature on the inside. In this situation, all you can do is wait.
If hot air accumulates on the ceiling and feet are left feeling cold, it is recommended to use a circulator.
For details, contact the place of purchase.
(3) Adjustment
For programming TEMPERATURE, FAN SPEED and AIR FLOW DIRECTION, follow the procedure shown
below.
DOWN
TEMPERATURE SETTING
UP
Press TEMPERATURE SETTING button and program the setting temperature.
DOWN
In case of automatic operation
DOWN
temperature
The setting is impossible for fan operation.
NOTE
The setting temperature range of the remote controller is 16°C to 32°C.
FAN
FAN SPEED CONTROL
Press FAN SPEED CONTROL button.
Fan speed (HH, H, L) can be selected.
The microchip may sometimes control the fan speed in order to protect the unit.
Control Systems
Each time this button is pressed, setting temperature rises 1°C.
UP
Each time this button is pressed, setting temperature lowers 1°C.
Each time this button is pressed, setting temperature shifts to "H" side.
UP
Each time this button is pressed, setting temperature shifts to "L" side.
H • M
Setting
25 23 22
Remote Controller (Wireless Type)
°
[ C]
• L
21 19
2
55