Mixer/Tuning: Fx Send - Korg PA800 User Manual

90 Style Play operating mode

Mixer/Tuning: FX Send

C0 Center.
R+1...R+63 Right stereo channel.
Off If the track's output status is Left&Right (normal
setting), the direct (uneffected) signal is not sent
to the outputs; only the FX signal is heard for this
track.
If the track is sent to a separate output, no FX is
sent to any output.
To program the output status for each track, see
"Audio Output: Sty/Kbd" on page 206.
Volume of grouped Style tracks
This parameter is a general offset applied to all Styles. While the
balance between the individual Style tracks can change when
choosing a different Style, the average volume, set here, will not
change. This is useful to avoid sudden changes in volume when
choosing different Styles.
Volume of individual tracks
Track's volume. This is the relative volume of each track, as saved
in the Style, Performance or STS. It may change when choosing a
different Style, Performance or STS.
0...127 MIDI value of the track's volume.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors. The effect processors
included in Pa800 are connected in parallel, so you can decide
which percentage of the direct signal can be effected:
Track
FX Processor
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Pan to Off (see "Pan" above):
Track
FX Processor
There are four Internal FX processors in Style Play mode (two
for Keyboard tracks, two for Style and Pad tracks). You can
assign them any kind of available effects, but we found it conve-
nient to arrange them in the following way, for most of the
Styles, STS and Performances included with the Pa800:
FX A Reverb processor for the Style tracks.
Sty
Sty
Sty
Out L/R
Out L/R
FX B Modulating FX processor for the Style tracks.
FX C Reverb processor for the Realtime (Keyboard)
tracks.
FX D Modulating FX processor for the Realtime (Key-
board) tracks.
Use the TRACK SELECT button to switch from Keyboard to
Style tracks, and vice-versa.
Send level (A...D)
0...127 Level of the track (direct) signal sent to the effect
processor.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Sty