3. DISASSEMBLY AND REASSEMBLY
3-1 PREPARATIONS AND PRECAUTIONS
(1) When disassembling the engine, memorize the location of each part so that you can
reassemble the engine correctly . If necessary, attach identification tags with the required
assembly information to the parts .
(2) Store groups of parts in separate boxes . This will make reassembly easier .
(3) To prevent parts from being mislaid, keep each group provisionally assembled after
removing the parts from the engine .
(4) Handle the disassembled parts with the utmost care . Clean them with cleaning oil if
necessary .
(5) Use the correct tools in the correct way when disassembling and reassembling the engine .
3-2 SPECIAL TOOLS
Flywheel puller for pulling off the flywheel
Dwyer #490-1 Wet
Wet handheld manometer
Throttle body
Computer data cable with 9 volt battery
Diagnostic EFI Compact Disc
Desktop or laptop computer
Description
FLYWHEEL PULLER
Parts number
Commercially available product
XXXXXXXX
308802006
XXXXXXXX
RS232 9-pin COM port on computer
- 3 -