Step
Parts to remove
Governor system
9
Carburetor, Insulator
10
Speed control lever and
11
Bracket
GOVERNOR LEVER
GOVERNOR SHAFT
Remarks and procedures
(1) Loosen the bolt and remove the governor
lever from the governor shaft. There is no
need to remove the bolt.
(2) Remove the governor spring.
(3) Remove the governor rod and the rod
spring from the carburetor.
Remove the carburetor from the cylinder head.
Remove the insulator.
Remove the speed control lever and bracket
from the cylinder head.
GOVERNOR ROD
and ROD SPRING
M6 x 12 BOLT : 2 pcs.
Fig.5-7
- 19 -
10 mm box spanner or
spanner
M6 × 30mm : 1 pc.
10 mm box spanner
M6 × 12mm : 2 pcs.
GOVERNOR SPRING
SPEED CONTROL LEVER
and BRACKET
GASKET
GASKET
INSULATOR
Fasteners
CARBURETOR