Subaru EX13 Service Manual page 42

(19) FLYWHEEL AND STARTING PULLEY
NOTE: When mounting the flywheel, be sure to
wipe off any oil on the tapered portion of
the crankshaft and flywheel.
Mount the flywheel on the crankshaft. (Tighten
the flywheel together with the starting pulley.)
Tightening torque
-
59.0
( -
590 640 kgf ・ cm)
( -
42.7 46.3 ft・ lb.)
M14 nut : 1 pc. (EX13, 17, 21)
M18 nut : 1 pc. (EX27)
(20) IGNITION COIL
When mounting the ignition coil, insert a
thickness gauge between the ignition coil and
the flywheel to check the air gap.
Air gap
Tightening torque
7.0 - 9.0 N ・m
(70 - 90 kgf ・ cm)
(5.1 - 6.5 ft・lb.)
M6 25 bolt and washer : 2pcs.
64.0 N ・ m
0.3 - - - - - 0.5 mm
- 39 -
Align the 2 bosses of starting pulley with the depression of flywheel.
Fig. 5-50
Fig. 5-51
IGNITION COIL
Fig. 5-52
Fig. 5-53
FLYWHEEL
STARTING PULLEY
THICKNESS
GAUGE
To STOP
SWITCH