Subaru EX13 Service Manual page 31

Step Parts to remove
Crankshaft
27
Oil sensor (option)
28
Fig.5-24
CRANKCASE
WOODRUFF KEY
CRANKSHAFT
Remarks and procedures
(1) Remove the woodruff key (for the flywheel
magneto).
(2) Remove the crankshaft from the crankcase
by tapping its magneto side end with a plastic
hammer, taking care not to damage the oil
seal. (See Fig. 5-24)
(1) Remove the clamp. (See Fig. 5-25)
(2) Remove the oil sensor from the crankcase.
Fig.5-23
- 28 -
Fasteners
Plastic hammer
M6 × 12mm : 1 pc.
M6 × 16mm : 2 pcs.
OIL SENSOR
Fig.5-25
M6 x 10 TAPPING
BOLT : 1 pc. (EX27 only)
CLAMP
OIL
SENSOR
CLAMP
SHIELD PLATE
(For charge coil only)
M6 x 16
BOLT : 2 pcs.