Disassembly And Reassembly; Disassembly Procedures - Subaru EH09-2D Service Manual

2. DISASSEMBLY AND REASSEMBLY

2-1 DISASSEMBLY PROCEDURES

Step Parts to remove
Engine oil drain
1
Recoil starter
2
Blower housing
3
OIL GAUGE
GASKET
STEP 1
OIL DRAIN
PLUG
M4 TAPPING SCREW : 2 pcs.
M8 x 50 FLANGE BOLT : 1 pc.
STEP 2
Remarks and procedures
(1) Remove oil drain plug and drain oil.
(2) To discharge oil quickly, remove oil gauge.
Remove recoil starter from blower housing.
Be careful of pulling direction of starter rope.
Disconnect wire of stop switch first, then
remove blower housing from crankcase.
GASKET
BLOWER HOUSING
STOP SWITCH
CLAMP
RECOIL STARTER
M6 x 8 FLANGE BOLT : 3 pcs.
STEP 3
M8 x 16 FLANGE BOLT : 3 pcs.
– 2 –
Fasteners
14 mm spanner
M6 x 8 : 3 pcs.
10 mm box spanner
M8 x 16 : 3 pcs.
M8 x 50 : 1 pc.
12 mm box spanner
P.T.O. shaft side
P.T.O. shaft side