Subaru EX13 Service Manual page 41

(16) ROCKER COVER
Replace the gasket with a new one, and mount
the rocker cover.
M6 12mm flange bolt : 4 pcs.
Tightening torque
-
5.0 7.0 N ・m
( -
50 70 kgf ・ cm)
(3.6 - 5.1 ft・lb.)
(17) SPARK PLUG
Remove any carbon deposits from the spark plug
and inspect the electrode for damage before
mounting. Replace with a new one, if necessary.
Spark plug: NGK BR-6HS
or CHAMPION RL86C
Electrode gap
(18) BAFFLE 1 (CASE)
Align the top and bottom of the baffle 1 (case)
with the crankcase and mount it with the bolts.
[ Model without electric starter]
M6 12 mm bolt : 1 pc.
(Models EX13, 17 and 21)
M8 12 mm bolt : 1 pc. (Model EX27)
BAFFLE 1 (CASE)
0.6 mm - 0.7 mm
[ Model with electric starter]
Mount the electric starter and the charging coil,
referring to the illustrations of disassembly.
UPPER
M6 x 12 FLANGE BOLT : 1 pc.
(EX13, 17, 21)
M8 x 12 FLANGE BOLT : 1 pc.
(EX27)
LOWER
Fig. 5-49b
- 38 -
SPARK PLUG
GASKET
(ROCKER COVER)
Fig. 5-48
Tightening torque
New spark plug
.
0 - 15.0 N ・ m
12
(120 - 150 kgf・ cm)
(8.7 - 10.8 ft・ lb.)
Tightening torque
EX13, 17, 21
4.0 N ・m
(40 kgf・cm)
(2.9 ft・lb.)
EX13, 17, 21
TO IGNITION COIL
BAFFLE 1
(CASE)
HOOK
TO OIL SENSOR
Fig. 5-49a
ROCKER
COVER
M6 x 12
BOLT : 4 pcs.
Re-tightening torque
23.0 - 27.0 N ・ m
(230 - 270 kgf・ cm)
(16.6 - 19.5 ft・ lb.)
EX27
12.0 N ・m
(120 kgf・cm)
(8.7 ft・lb.)
OIL SENSOR
UNIT