Step
Parts to remove
Main bearing cover
21
Fig. 5-16
M8 x 35mm : 6 pcs.
(MODELS EX13,
17 AND 21)
M8 x 35mm : 7 pcs.
(MODEL EX27)
STEP 21
MAIN BEARING COVER
Remarks and procedures
(1) Remove the flange bolts of main bearing
cover from the crankcase.
Remove the main bearing cover while
tapping gently around the cover using
a plastic hammer or similar tool.
(See Fig. 5-16)
Be careful not to damage the oil gauge
or oil seal or not to lose the pipe knocks.
PIPE KNOCK
Fig. 5-15
- 24 -
Fasteners
12 mm box spanner
M8 × 35mm : 6 pcs.
(Models EX13, 17 and 21)
M8 × 35mm : 7 pcs.
(Model EX27)