Subaru EX13 Service Manual page 46

(25) MUFFLER
(1) Mount the muffler and the gasket on the cylinder head.
GASKET
(Attention to the wrong side and right side)
MUFFLER SIDE
(RIGHT SIDE)
CYLINDER SIDE
(WRONG SIDE)
Take utmost care not to cut your
hand with the muffler gasket
M8 12 mm bolt : 1 pc.
M8 nut : 2 pcs.
Tightening torque
-
18.0
( -
180 220 kgf ・ cm)
( -
13.0 15.9 ft・ lb.)
(2) Mount the muffler cover on the muffler.
M6 8 mm flange bolt : 1 pc.
M6 10 mm tapping bolt : 2 pcs.
NOTE : Be sure to remove any tape or cloth used
to cover the exhaust port when the engine
was disassembled.
(26) FUEL TANK
(1) Mount the fuel strainer to the fuel tank.
Tightening torque for fuel strainer
-
3.0
( -
30 40 kgf ・ cm)
( -
2.2
(2) Connect the fuel pipe and fix it with a clamp.
Model EX13
Fuel pipe length
145(5.7) 150(5.9) 155(6.1) 195(7.7)
mm(in.)
NOTE : Make sure the fuel pipe is located on the boss,
as shown in the illustration, in order to prevent
the pipe from attaching to the flywheel.
In case the pipe is routed improperly, the pipe might
be hit by the flywheel and will be damaged.
22.0 N ・ m
4.0 N ・m
2.9 ft・lb.)
EX17 EX21 EX27
- 43 -
M6 x 10
TAPPING BOLT : 2 pcs.
M6 x 8
FRANGE BOLT : 1 pc.
M8 NUT : 2 pcs.
M8 x 12 BOLT : 1 pc.
GASKET
(Attention to the wrong
side and right side)
Fig. 5-59a
HOSE
M6 NUT
CLAMP
: 2pcs.
Fig. 5-59b
MUFFLER
FUEL
STRAINER
FUEL PIPE
M6 x 25 BOLT : 1pc.
(EX13, 17, 25)
M8 x 25 BOLT : 2pcs.
(EX27)