Table of Contents
Advertisement
Chapter 1 - Introduction to the MultiVOIP
Back Panel Description
The cable connections for the MVP120 are made at the back panel. Connectors include
Power, Ethernet, Command Port (RJ-45), and FXO Voice/Fax Channel. The cable
connectors are shown and defined belos.
Back Panel
Power Connector
The Power connector is used to connect the external power supply to the MVP120.
Ethernet Connector
The Ethernet connector is used to connect the MVP120 to a LAN using unshielded twisted
cable. This connector is an RJ-45 jack.
Command Connector
The Command connector is used to configure the MVP120 using a PC with an available
serial port and running Windows software. The Command connector is an RJ-45 jack (an
adapter cable is provided to convert to a standard serial port DB9 female connector).
Phone Connector
Connects the FXO Voice/Fax Channel to an FXO/PBX port or PTSN. This connector is an
RJ-11 jack.
Multi-Tech Systems, Inc. MultiVOIP User Guide
13
Advertisement
Table of Contents
