Table of Contents
Advertisement
43.
When you have finished, click OK to download the setup configuration to the
MVP120.
44.
Click OK. After the setup is written to the MVP120, the unit reboots.
45.
Verify that the BOOT LED on the MVP120 is off after the download is complete. This
may take several minutes as the MVP120 reboots.
At this time your master MVP120 is configured. Proceed to the "Configuring Your
Slave MVP120s" section.
Multi-Tech Systems, Inc. MultiVOIP User Guide
Chapter 4 - Configuring the Master MultiVOIP
35
Advertisement
Table of Contents
